Northtech, NT 750-10 Pneumatic Overarm Pin Router

Contact us for a detailed spec sheet and a quote

 

NT 750-10 Overarm Pin Router

 

• 10HP spindle drive motor

• Chuck to table top maximum: 7-1/2"

• Throat clearance: 700mm (27-½")

• 2 Speed Spindle: 8,100 / 16,300 RPM

• Spindle travel: 95mm (3-¾")

• Depth stops: 6 position turret stops, adjustable

• Table travel: 190mm (7-½")

• Table surface area: 915mm x 101mm (36" x 40")

• Table tilt: 45° front downward

• Micrometric table raise: 1/32" (1mm) per full revolution of hand wheel

• 35 x 2330mm (1-3/8" x 92") flat belt

• Dust port size: (1) 3" requiring 350 CFM at point of extraction

• Net weight / Gross weight: 1465 lbs / 1650 lbs

• Packing dimensions: (L) 66" x (W) 44" x (H) 71"

• (1) Tool box

• Warranty is one year parts

• All machines are tested stateside prior to shipment providing trouble free start up.

 

 

  • Machine Hp. = 10 Hp.
  • Voltage/ Freq. = 230 Volt 60Hz
  • Phase = 3 Phase
  • Amp Requirement = 26 Amps
  • Configuration = 1/4'' 3/8'' 1/2'' Collet
  • Spindle RPM = 8100 / 16300 RPM
  • Elevation Style = Manual Wheel Adjustment
  • Elevation Sys. = Jack Screw / Linear Guides
  • Total Hp. = 10 Hp.
  • Electronics = CE Approved Components
  • Control Voltage = 230 Volt
  • Throat Capacity = 22''
  • Min. Thickness = 1-1/2'' Collet to Table
  • Max. Thickness = 7-1/2'' Collet to Table
  • Vertical Travel = 7-1/2''
  • Dust Collection = (1) 3'' @ 245 CFM
  • Dust Port Out = 3''
  • Emergency Stop = Push Button
  • Guarding = High Visiblity Gaurding
  • Operation Style = Pneumatic Foot Pedal
  • Fence Type = Adjustable Fence
  • Fence Dims. = 2-1/2'' x 40''
  • Tiltable = 45 Degrees
  • Frame Const. = 3/8 Steel Construction
  • Worktable Dims. = 39-3/4'' x 35-1/2''
  • Table Const. = Machined Steel
  • Decible Rating = 73 Db
  • Net Weight = 1462 Lbs.
  • Gross Weight = 1647 lbs.
  • Machine Dims. = 40'' x 62'' x 64''
  • Packaging Dims = 44'' x 66'' x 71''

© 2020 Martin's Woodworking Machinery

  • Facebook - Black Circle