2022 Cantek CFS100 Automatic Defect Cutoff Chop Saw

No longer available

2022 Cantek CFS100 Automatic Defect Cutoff Chop Saw

$36,500 (USD)

Available quantity: 1

Pembroke, KY


Like New

This machine was purchased as a fill-in saw while waiting on a new Weinig system

An economical and high-speed approach to defect cross-cutting with partial optimization.

The Cantek CFS100 Automatic Defect Cutoff Chop Saw is the perfect upgrade from your manual cutoff saw with 3 to 5 times higher production output. It is designed to scan for defects in your material which are indicated by a florescent crayon mark. The saw will cut on the crayon mark allowing for fast defect removal. Equipped with several cutting modes like fixed, sequential, defect cutting modes the operator can select the program most suited to their needs. The powerful 10HP motor and 18” blade provide for effortless cutting from 11.8” (w) x 2.75” (t) or 5.9” (w) x 3.9” (t). An optional feature is available for cutting thin material down to 0.078” (2mm) which is ideal for lamellas for engineered flooring.

Why Cantek CFS100 Automatic Defect Cutoff Chop Saw?

Ideal for the defect cutting wood mouldings, wood flooring, finger joint blocks, wood paneling and more!

Machine scans for defects marked with a florescent crayon allowing for high-speed defecting

Provides 3 to 5 times higher production rate than manual cut-off saws.

5% increase in material yield over manual cutting operations

+/- 1mm (0.0393”) accuracy

Safe operation with automatic feeding and comprehensive safety guards

Partial optimization with sequential and fixed part cutting functions or simply cut out defects


Serial Number22100009
Saw Motor10HP
Saw Spindle Speed3200 RPM
Feed Motor (Servo motor)2.7HP (2Kw)
Max. feed speedVariable to 262 ft/min (80 m/min)
Max. infeed weight44 lbs (20 kgs)
Circular Saw DiameterØ 18” (455mm)
Saw spindle diameter30mm
Minimum distance between marks0.787” (20mm)
Air pressure for machine72~85 PSI (5~6 kg/cm2)
Dust ports2 @ 4”