Northtech, NT 735LT-1034 Shaper

NT 735LT-1034 Shaper Options: • Sliding table with 8 rollers bearings • Tilting spindle assembly (-5 - 45 Degrees) • Tilting Spindle / Sliding Table • Optional 7” under nut spindle with spacers and nut (MK5 series) • Optional 15HP motor • Voltage change to 460 volt • Optional 3/4'', 1'', 1-1/4'' spindle with spacer nut (MK5 series) • Optional 40mm spindle with spacers and nut (MK5 series) • M-10 digital LED readout of spindle height (installed) • DP-727 digital electronic set works with power raise and lower lower plus 99 positions memory / recall • (1) Tool box • Warranty is one year parts • All machines are tested stateside prior to shipment providing trouble free start up.

• Reverse Motor = Reversible
• Machine Hp. = 10 hp.
• Voltage/ Freq. = 230 Volt 60Hz
• Phase = 1 Phase
• Amp Requirement = 25 Amps
• Spindle Diam. = 1-1/4''
• Spindle RPM = 2875 - 9500 Rpm
• Under Nut Cap. = 6''
• Elevation Style = Manual Wheel Adjustment
• Elevation Sys. = Jack Screw / Quill Housing
• Electronics = UL Approved Components
• Dual Voltage = 230/460 Volt
• Control Voltage = 110 Volt
• Pass-Line = 35''
• Vertical Travel = 6''
• Dust Collection = (1) 5'' @ 681 CFM
• Emergency Stop = (1) Push Putton (2) Bars
• Fence Type = Micro Adjustment Fence
• Fence Dims. = (2) 6'' x 23-3/4''
• Micro Fence = Micro Adjustable
• Tiltable = -5 / +45 Degrees
• Brake System = Foot Pedal Brake
• Frame Const. = 1/4'' Steel Construction
• Worktable Dims. = 36'' x 47-3/4''
• Table Const. = Cast Iron
• Infeed Table = 20''
• Outfeed Table = 20''
• Measure Meth. = PT28 Digital Readout
• Decible Rating = 73 Db
• Net Weight = 1770 Lbs
• Gross Weight = 1955 Lbs.
• Machine Dims. = 88'' x 48'' x 50''
• Packaging Dims = 91'' x 55'' x 53''