Northtech NT-600C 25'' Wide Belt Sander
Northtech NT-600C 25'' Wide Belt Sander
Contact us for price
Available quantity: 1
Dundee, NY
orCall +1 (607) 678-4374
Description
The NT-600C single combination head wide belt sander has a 24'' working width and comes standard with a 24'' x 75'' belt and variable speed invisible seam feed mat. The combination head provides the benefit of sanding with a roller and platen inside a single-head machine footprint. Features heavy steel frame design, digitally positioned elevation control with close to 6'' opening and independent start/stop controls for the feed and bely
Specifications
| Manufacturer | Northtech |
| Model | NT-600C |
| Condition | New |
| MACHINE HP | 11-1/4HP |
| VOLTAGE, FREQUENCY | 230/460 Volt 60Hz |
| PHASE | 3 Phase |
| AMP REQUIREMENT | 33/16.5 Amps |
| Configuration | Combination |
| 1st HEAD | 15 HP 4'' Fluted Drum with Platen |
| FEED HP | 1 HP |
| FEED SYSTEM | 24/1/2'' Feed Mat |
| DRIVE SYSTEM | Motor / Gear Box Variable Speed Clutch |
| FEED SPEED RANGE | 15-35 FPM |
| VARIABLE FEED SPEED | Adjustable Pulley |
| ELEVATION HP | 1/4 HP |
| ELEVATION STYLE | 4 Post Jack Screw |
| APPROVED ELECTRICAL PARTS | CE Approved Parts |
| DUAL VOLTAGE MOTORS | 230/460 Volt |
| CONTROL VOLTAGE | 220 Volt |
| MIN. WORKING LENGTH | 12'' |
| MAX. WORKING WIDTH | 24-1/2'' |
| MIN. WORKING THICKNESS | .160'' |
| MAX. WORKING THICKNESS | 6'' |
| SANDPAPER SIZE | 25'' X 75'' |
| PLATEN SPECIFICATIONS | 1-3/4'' x 27'' |
| DRUM SPECIFICATIONS | 4'' Spiral Fluted 65 Durometer |
| ROLLER TYPE | 3'' Rear Steel Idle Drum |
| 1st BELT SPEED | 2600 FPM |
| OSCILLATION RATE | 12 Cycles per minute |
| OSCILLATION TRAVEL | 3/4'' |
| CLEANING SYSTEM | Jet Blow Off on Tracking Sensor |
| TRACKING STYLE | Pneumatic Cylinder |
| TENSION STYLE | Pneumatic Cylinder |
| DUST COLLECTION REQUIREMENT | 681 CFM @Extraction Points |
| DUST PORT SIZE OUTLET | (2) 5'' Ports |
| DIGITAL DISPLAY | Elevation Controller |
| PRESSURE SHOES | (2) |
| HOLD DOWN STYLE | Pressure Shoe / Rollers |
| FLR INCLUDED | Filter/,Lubricator,Regualtor |
| CFM AIR SUPPLY REQUIREMENT | 3/8'' Line @90 PSI |
| EMERGENCY STOP | Push Button |
| REAR E STOP | Push Button |
| GUARDING | Full Enclosure |
| FRAME CONSTRUCTION | 1/4'' Steel |
| TABLE CONSTRUCTION MATERIAL | Steel |
| DECIBEL RATING | 78 dB |
| NET WEIGHT | 1420 Lbs. |
| GROSS WEIGHT | 1654 Lbs. |
| MACHINE DIMENSIONS | 50'' x 41'' x 74'' |
| PACKAGING DIMENSIONS | 44'' x 53'' 84'' |