Laguna, Pro 37″ Widebelt Sander

This machine is equipped with 1 combination head. This means you can sand either using the drum or the sanding platen or both at the same time. Due to the large HP motor (20 HP) the machine is capable of dimensioning even wide boards. This is important for customers who do not own a thickness planer. When you use the machine to dimension your work only very aggressive paper 60 or 80 grit should be used. The heavy carpet feed belt is powered by a separate 1HP motor and has a variable speed conveyor of 12-60 FPM.

Features:

• Single Drum
• Main Motor: 20HP 3 Phase
• Variable Feed Motor: 1HP
• Table Lifting Motor: 0.25HP
• Capacity: 37″
• Belt Length: 75″

You can adjust the thickness in 3 ways:

1. Manual hand wheel on the bottom of the machine
2. By pressing the up or down arrow the table will move in the desired direction
3. By tapping these same arrows the machine will move an exact amount with each tap

The auto thickness gauge will measure your wood piece and automatically set the table to the thickness of the piece of wood inserted