Grizzly G0819 - 15" 5 HP Open-End Wide-Belt Sander

Grizzly G0819 - 15" 5 HP Open-End Wide-Belt Sander

Contact us for price

Location:Dundee, NY

orCall +1 (607) 678-4374

Description

Double your sanding capacity within a small footprint.

The G0819 15" 5 HP Open-End Wide-Belt Sander is for those looking to maximize efficiency in their wood shop.

With a footprint of 19-1/2" x 27-1/2", this heavy-duty sander is capable of sanding a 30" wide workpiece in two passes. That’s a lot of capacity for a smaller sander!

It takes less than 30 seconds to change out the 16" x 48" sanding belts.

With a focus on rigidity and production work, the G0819 will have zero flex on a heavy pass. An adjustable side support slides out from the side of the machine, eliminating the need for aftermarket supports.

The three conveyor speeds of 16.4, 23, and 32.8 feet per minute allow for adjustment based on the type wood being sanded.

The G0819 has pneumatic oscillation speed control and a pulse-jet cleaning system to keep the electric oscillation sensor dust-free.

Other quality features such as an amp meter, micro-adjustable graphite-felt platen, and emergency stop plate makes this a high-caliber machine.

Like all Grizzly wide-belt sanders, the G0819 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects.

The G0819 manual was written by our U.S. based Technical Documentation Department and is packed with useful information.

The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the sander may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.

Made in an ISO 9001 factory


FEATURES:

Quick sandpaper changes

Pneumatic belt tracking and tensioning

Built-in pneumatic regulator/water separator

Micro-adjustable graphite-felt platen

Handwheel-controlled table elevation

Inch/metric thickness scale

Two rubber pressure rollers

Digital amp/load meter

Disc brake for emergency stops

Safety shut-off bar

Specifications

ManufacturerGrizzly
ModelG0819
ConditionNew
Sanding belt motor5 HP, 220V, single-phase, 30 A
Conveyor motor1/2 HP, 2.8A
Air requirement75 PSI, 2 CFM
Maximum board width15" single pass, 30" double pass
Maximum board thickness6"
Minimum board length12-5/8"
Sanding belt size16" x 48"
Sandpaper speed2300 FPM
Conveyor speed rate16.4, 23, 32.8 FPM
Conveyor table length24"
Platen type1-3/4" x 15-3/8" Graphite pad
Dust port size5"
Footprint19-1/2" x 27-1/2"
Overall size29-1/8" W x 38-1/2" D x 64-1/2" H
Approximate shipping weight930 lbs.