Northtech, NT PN14 Panel Notcher

Northtech, NT PN14 Panel Notcher

Contact us for price

Dundee, NY

orCall +1 (607) 678-4374


The NT-PN14 is a double blade saw designed to cut an adjustable 90 degree notch. The (2) 5HP 14″ blades power through up to 8″ of material with over 5″ x 5″ capacity. While most commonly used for toe kicks, the NT-PN14 can be used on a variety of materials requiring square cut outs. Northtech offers a variety of saws for any application.

FEATURES: • Specially designed for cutting tall work pieces • Saw blades feed vertically. Maximum height of. cutting is 7''. • Two staggered saw blades are perfectly positioned at 45° vertically to reduce work piece waste to a minimum. • Saw blades move vertically on two precision shafts, assuring consistent cutting. • Compensation for saw blade wear is easy to adjust. • Saw blade height Is adjustable for saving time during cycle.


Main Motor Hp.5 hp. x 2
Voltage/ Freq.230/460 Volt 60Hz
Phase3 Phase
Amp Requirement30 Amps
Total Hp.10 Hp.
ElectronicsCE Approved Components
Control Voltage24 Volt Control Voltage
Min. Width1-1/8'' x 1-1/8''
Max. Width5-1/2'' x 5-1/2''
Max. Thickness7''
Arbor Rpm3100 Rpm
Blade Size14'' Tungsten Carbide Tipped
No. of Teeth120 Tooth
Tooth Spacing3/8''
Blade Kerf.118 In.
Cleaning SystemDetail Blow Off Nozzle
Vertical Travel7''
Dust Collection(2) 4'' @ 900 CFM
Arbor Diameter1''
Cycles/Minute5 Cycles Per Minute
Hold Down StyleDual Pneumatic Clamps
Recommended CFM1/4'' Line @ 90 PSI
Waste DischargeSide Chute
Emergency Stop(1) Push Button (2) Bars
Safety FeatureSafety Interlock Switch
GuardingHigh Visibility Guarding
Operation StyleDual Push Button
Fence TypeAdjustable Fence
Fence Dims.7-1/4'' x 12-1/2''
Frame Const.3/16'' Steel Construction
Worktable Dims.16-1/4'' x 37-1/2''
Table Const.Steel
Measure Meth.Lineal Scale on Fence
Decible Rating70 dB
Net Weight908 Lbs.
Gross Weight1102 Lbs.
Machine Dimensions39-1/2'' x 36'' x 63-1/2''
Packaging Dimensions48'' x 44'' x 69''