Laguna REVO 12|16 Midi Lathe PWM

Laguna REVO 12|16 Midi Lathe PWM

Contact us for price

Dundee, NY

orCall +1 (607) 243-7167

Description

The 1216 controls the 1hp DC motor using pulse width modulation. A big problem with DC motor control is torque in the low speeds, and you will find many MIDI lathes with the lowest speed of 250RPM and higher because of this. This is because the cost effect controllers introduce resistance into the voltage to limit the power, which reduces the speed but also reduces the torque at the same rate. PWM will deliver full torque across the entire speed range. This allows for tremendous torque in low speeds which is helpful when roughing and precision work. This also allows for outboard turning up to a 16” bowl on a mid-sized lathe. Electrical Requirements: 100V-1Ph-60Hz Recommended Breaker Size: 110V – 15 Amp Speed Range High: 650 – 3500 RPM Speed Range Mid: 325 – 1750 RPM Speed Range Low: 50 – 525 RPM Distance Between Centers: 15.5″ Swing Over Bed: 12-1/2″ Swing Over Banjo: 9-1/2″ Max Outboard Swing: 16″ Spindle Bore: 3/8″ Spindle Taper: MT2 Spindle Thread: 1″ x 8 TPI (both ends) Front Bearing: 6006LLU Rear Bearing: 6005LLU Indexing: 24 Positions with Lock Drive Belt: Poly-V Belt 6 Grooves Tail Stock Quill Travel: 2-1/2″ Tail Stock Taper: MT2 Bed Length: 29.4″ Tool Rest Length: 6″ Tool Rest Post Diameter: 1″ Faceplate Diameter: 3″ Certification: CSA C/US 256540 Floor To Bed Height: 6.7″ no pads Floor To Spindle Center: 13″ No Pads Overall Size (L x W x H): 29.4″ x 8.9″ x 17.4″ Shipping Dimensions (L x W x H): 35.8″ x 14.6″ x 20.5″ Net Weight: 118 lbs Shipping Weight: 125 lbs

Specifications

ManufacturerLaguna
ConditionNew
Stock NumberMLAREVO1216EVS