Northtech NT-N6230 Moulder 6 Head
or
Call +1 (607) 678-4374
Description
NT-N6230 MOULDER 6 HEAD The NT N6230 is quite possibly the best-valued moulder available. The 6″ x 9″ capacity moulder with a standard 6-head configuration provides limitless profiling possibilities. Features such as a chrome table, Siko mechanical readouts, automatic bed oiler and independent spindle motors powering 1-13/16″ 6000RPM Spindles are standard. There are a vast amount of optional features available making the N series an excellent option to higher priced competitive models.
Specifications
| Manufacturer | Northtech |
| Model | NT-N6230 |
| Condition | New |
| Stock Number | NT-N6230 |
| MACHINE HP | 88 HP |
| VOLTAGE, FREQUENCY | 230/460 Volt 60HZ |
| PHASE | 3 Phase |
| AMP REQUIREMENT | 210/105 Amps |
| CONFIGURATION | B-R-L-T-T-B |
| 1ST SPINDLE | Bottom Horizontal 10 HP 6000 RPM |
| 2nd SPINDLE | Right Vertical 10HP 6,000 RPM |
| 3rd SPINDLE | Left Vertical 10HP 6,000 RPM |
| 4th SPINDLE | Top Horizontal 15HP 6,000 RPM |
| 5th SPINDLE | Top Horizontal 15HP 6,000 RPM |
| 6th SPINDLE | Bottom Horizontal 10 HP 6,000 RPM |
| SPINDLE DIAMETER | 1-13/16'' |
| SPINDLE RPM | 6000 RPM |
| UNDER THE NUT CAPACITY | 10-1/2'' Horizontal 7-1/2'' Vertical |
| FEED HP | 7.5 HP |
| FEED SYSTEM | Knurled and Urethane Rollers |
| DRIVE SYSTEM | Carden Shaft |
| FEED SPEED RANGE | 20-120 FPM |
| VARIABLE FEED SPEED | Inverter Controlled |
| REVERSIBLE FEED | Reversible |
| ELEVATION HP | 1/2 HP |
| ELEVATION STYLE | Manual Knob Control |
| ELEVATION SYSTEM | Linear Guide Jacks Screws |
| TOTAL MACHINE HP | 88 |
| APPROVED ELECTRICAL PARTS | CE Approved Parts |
| DUAL VOLTAGE MOTORS | 230/460 Volt |
| CONTROL VOLTAGE | 110 Volt |
| ASSISTED START | Wye Delta Spindle 4, 5 |
| PASS-LINE | 35-1/2'' |
| MIN. WORKING LENGTH | 12'' |
| MIN. WORKING WIDTH | 3/8'' |
| MAX. WORKING WIDTH | 9'' |
| MAX. WORKING THICKNESS | 6-1/2'' |
| TOOLING | Straight Knife Heads |
| ROWS OF CUTTERS | 4 Knives |
| DUST COLLECTION REQUIREMENT | 981 CFM @ Extraction Points |
| DUST PORT SIZE OUTLET | (6) 5'' Dust Ports |
| DIGITAL DISPLAY | Feed Speed |
| POWERED ROLLERS | (3) Bottom (8) Top |
| PRESSURE SHOES | (2) Pressure Shoes |
| HOLD DOWN STYLE | Pneumatic Hold Downs / Pressure Shoes |
| FLR INCLUDED | Filter, Lubricator, Regulator |
| CFM AIR SUPPLY REQUIREMENT | 3/8'' Line @ 90 PSI |
| EMERGENCY STOP | Push Button |
| REAR E STOP | Push Button |
| GUARDING | Full Enclosure |
| OPERATION STYLE | Auto / Manual |
| GREASE MANIFOLD | (19) Fittings |
| OILER | Bed Oiler |
| FENCE TYPE | Adjustable |
| FRAME CONSTRUCTION | Cast / Steel Construction |
| WORKTABLE DIMENSIONS | 11'' x 136'' |
| TABLE CONSTRUCTION MATERIAL | Chromed Cast Steel |
| INFEED TABLE LENGTH | 51-1/4'' |
| CHROME BED PLATE | Yes |
| NOISE REDUCTION BED PLATE FINGERS | 1st Head |
| MEASURING METHOD | Siko Counter |
| DECIBEL RATING | 79 dB |
| NET WEIGHT | 9110 Lbs. |
| GROSS WEIGHT | 10800 Lbs. |
| MACHINE DIMENSIONS | 158'' x 75'' x 71'' |
| PACKAGING DIMENSIONS | 163'' x 82'' x 72'' |