Laguna, P12|8 Panelsaw

Laguna, P12|8 Panelsaw

Contact us for price

Location:Dundee, NY

orCall +1 (607) 678-4374

Description

The P12|8 was designed to clear 8-ft. material using a 12″ blade. This means that when you finish your stroke, the back end of your sheet will just have cleared the blade, causing no friction as the blade is spinning down. The 102″ sliding table is constructed of anodized aluminum. The dumbbell design is widely recognized as the superior choice for high-end sliders today. Ultra-smooth movement allows you to move the table effortlessly. The European style 51″ rip fence consists of a heavy-duty casting riding on a micro-polished solid steel bar. On the backside of the casting is a small adjustable wheel to make sideways movement a breeze. The rip fence is outfitted with a micro adjustment for fine-tuning; simply lock it in place and adjust fence incrementally. The overhead guard comes standard with quick-change 90° and 45° guards; you can switch from one to the other in a matter of seconds. A nice detail is the swing-away function that allows you to quickly move the guard out of the way. Dust collection hookup is out of the way at the end of gantry (5″). The heavy-duty anodized aluminum crosscut fence features two solid flip-stops, telescoping function (max 108″), 45° miter and is ergonomically designed to make it easier to read the tape. Inside the P12|8 you will find heavy castings, solid gears and precision-machined trunnions mounted onto the solid steel frame. The heavy-duty motor is equipped with soft start to minimize initial amperage draw. The P12/8 comes standard with a hold-down clamp, rip shoe, and push handle.

Specifications

ManufacturerLaguna
ModelP12|8
ConditionNew
Stock NumberMPSP12-8-0135
Motor7.5HP 3ph or 5 HP 1ph
Voltage220v 60 HZ
Blade Capacity12″, 14″/300mm, 355mm
Max. Blade16″/400mm (minimum height when lowered: 1″/25mm)
Max Scoring Blade4-3/4″/120mm
Scoring AdjustmentT-Handle through Cast Top
Arbor30mm (Main), 20mm (Scoring)
Max Cutting Height 90° 14″/355mm Blade4-½″/115mm
Max Cutting Height 90° 16″/400mm Blade5-⅛″/130mm
Max Cutting Height 45° 14″/355mm Blade2-¾″/70mm
Max Cutting Height 45° 16″/400mm Blade3-½″/90mm
Main Blade Speed4000 RPM
Dust Collection Port Saw4.75″ (120mm)
Dust Collection Port Guard4″ (100mm)
Sliding Table102.36″ (2600mm)
Sliding Table Width14.88″ (387mm)
Main Cast Table21-½″ x 35-¼″
Rip Fence51″ (1300mm)
Rip Fence Micro AdjustIncluded
Rip Fence Bar1-⅝″ (40mm) Solid Steel Micro Polished
Push HandleIncluded
Rip ShoeIncluded
Hold Down ClampIncluded
32″ x 12″ Steel Extension TableIncluded
Cross Fence2 x Flip-Stop
Cross Fence ReadoutInch/Metric
Crosscut Fence Max Collapsed77″
Crosscut Fence Max Extended140″
Table Lock Positions2 Tabs, 20 Notches = 40 Total
Ship Dimensions Body83″ x 47″ x 46″
Ship Dimensions Table137″ x 20″ x 15″
Weight (Net/Ship)1815/2112 lbs