Northtech NT 760XL Double Surface Planer

Northtech NT 760XL Double Surface Planer

Contact us for price

Location:Dundee, NY

orCall +1 (607) 678-4374

Description

The NT 760XL is our 30″ chain drive double surfacer with 8″ thickness capability. Double surfacers, some times referred to as 2 sided planers are used to size the thickness of wood and other dense materials such as plastic. The top and bottom helical cutter head uses two sided 30x12x2.5 carbide insert cutters for a moulder smooth finish, even with heavy stock removal. The powered top and bottom feed system is designed with integrated chrome bed rollers and a chain driven spring loaded carpet spike infeed. The jointer table infeed and overhead spring loaded carpet spike system allows this machine to not only size the thickness, but also straighten warped or crooked material. The top head is easily accessible for tooling changes by removing the dust hood and the bottom head pulls out of the machine completely in just a couple minutes for full access. The upper assembly is supported by a heavy duty slideway system that provides precision thickness sizing across the entire width and has digital thickness positioning control. Northtech Double surfacers are available in 16″-52″ working widths with up to a 24″ working thickness and can be offered with a safety/sound enclosure.


Specifications

ManufacturerNorthtech
ModelNT-760XL
ConditionNew
Stock NumberNT-760XL
TOP HEAD HP40 HP
BOTTOM HEAD HP30 HP
VOLTAGE, FREQUENCY230/460 Volt 60HZ
PHASE3 Phase
AMP REQUIREMENT95 / 190 Amps
FEED HP5 Hp.
FEED SYSTEMCarpet Feed / Powered Rollers
DRIVE SYSTEMChain Drive
FEED SPEED RANGE20-70 FPM
VARIABLE FEED SPEEDInverter Controlled
ELEVATION HP1 HP
ELEVATION STYLEGTM-525-A Digital Controller
ELEVATION SYSTEM(4) Post Jack Screw
TOTAL MACHINE HP76 HP
APPROVED ELECTRICAL PARTSCE Approved Components
DUAL VOLTAGE MOTORS230/460 Volt
CONTROL VOLTAGE110 Volt Control Voltage
PROGRAMABLEElevation
PASS-LINE32''
MIN. WORKING LENGTH12-1/2''
MAX. WORKING WIDTH29-15/15
MIN. WORKING THICKNESS.396''
MAX. WORKING THICKNESS8.233''
CUTTER HEAD RPM5750 RPM
HEAD TYPEDynamically Balanced Helical Head
CUTTER HEAD DIMENSIONS5'' x 30''
CUTTER HEAD MATERIALAlloy Steel
ROWS OF CUTTERS6 Rows
NO. OF INSERTS114 Inserts Per Head
INSERT SIZE30 x 12 x 2.5 mm
NO. OF HEADS(2) Heads
DUST COLLECTION REQUIREMENT1745 CFM @ Points of Extraction
DUST PORT SIZE OUTLET(2) 8'' Ports
DIGITAL DISPLAYElevation / Feed Speed
POWERED ROLLERS(2) Top (2) Bottom Powered Rollers
IDLE ROLLERS(1) Top (1) Bottom Idle Rollers
HOLD DOWN STYLEChip Breakers/ Pressure Plate
CARPET SPIKE HARDNESSHRC 45
NO. OF SPIKES1350 Spikes
REAR E STOPPush Button
GUARDINGHigh Visibility Guarding
OILER(1) Auto Oiler (1) Manual Oiler
LOW OIL WARNING/SHUT OFFOil Low Warning / Shut Off
DECIBEL RATING77 dB
NET WEIGHT7822 Lbs.
GROSS WEIGHT8352 Lbs.
MACHINE DIMENSIONS105'' x 59'' x 75''
PACKAGING DIMENSIONS110'' x 58'' x 71''